TRANSMODE Products In Stock and Lead Time Available. TRANSMODE Replacement Spares and Upgrades.

TRANSMODE

Featured Products:

Power Supply unit, 48 VDC

Power Supply unit, 100- 240 VAC

Network Management Board

Ethernet Switch/Mux

All Products:

Part Number

Description

Make

Availability

Price

Quantity

Description:

Wavelength duplexer, 1310/1550 nm

TRANSMODE

Available

Available

Description:

Gigabit Converters. 1310 nm Gigabit Converter unit

TRANSMODE

Available

Available

Description:

Gigabit Converters. 1550 nm Gigabit Converter unit

TRANSMODE

Available

Available

Description:

PCB DISPLAY/SWITCH

TRANSMODE

Available

Available

Description:

Gigabit Converters. Line - 1310 nm SM / Client -1310 nm SM

TRANSMODE

Available

Available

Description:

Gigabit Converters. Line - 1550 nm SM / Client - 850 nm MM or 1310 nm SM

TRANSMODE

Available

Available

Description:

Gigabit Converters. Line - 1550 nm SM / Client -1550 nm SM

TRANSMODE

Available

Available

Description:

5000 Universal Aggregator. The 5300 is a cost-optimised unit specifically developed for ESCON applications. The unit can accept up to four different ESCON data streams. When used in combination with a high data rate aggregator, up to eight ESCON channels can share a wavelength.

TRANSMODE

Available

Available

Description:

5000 Universal Aggregator. The 5500 is a more general low data rate aggregator in the UA family. The unit is intended for aggregation of multiple protocols with bit rates up to 200 Mbps. Currently, the 5500 supports ESCON, Fast Ethernet, STM-1/OC-3, FDDI and ETR/CLO. The unit employs the same 1.25 Gbps line rate as its 5300 relative.

TRANSMODE

Available

Available

Description:

5000 Universal Aggregator. 5400 is available in two different versions, 5400/01 and 5400/02. 5400/01 takes two different data streams using Gigabit Ethernet or the output signal from the 5300/5500 as its input. 5400/02 takes two data streams using Fibre Channel or FICON as input. The two input signals are aggregated to an outgoing 2.5 Gbps line signal.

TRANSMODE

Available

Available

Description:

5000 Universal Aggregator. The 5600 uses the Generic Framing Procedure (GFP) standard allowing interoperability with existing SDH/SONET networks. The client signals are mapped into GFP according to ITU-T G.7041, Generic Framing Procedure (GFP). The GFP frames are transported over SDH/SONET through virtual concatenation, VCAT, according to ITU-T G.707. This is the most effective way to transport Gigabit Ethernet signals through an existing SDH/SONET network. 5600 takes as input the line signal from the 5300 or 5500, Gigabit Ethernet, Fibre Channel or FICON. The output from the 5600 is a regular STM-16/OC-48 signal.

TRANSMODE

Available

Available

Description:

7000 CWDM /DWDM Transponders The 7500 is the lowest cost transponder supporting line rates of 100Mbps - 1.25 Gbps. It provides basic functionality for CAPEX sensitive projects.

TRANSMODE

Available

Available

Description:

7000 CWDM /DWDM Transponders The 7700 is a fully featured 100Mbps - 2.5 Gbps transponder with pluggable optics on both the line and client side. This single module type is all that is required to build any CWDM or DWDM application. It is configured at provisioning time by fitting the appropriate optics.

TRANSMODE

Available

Available

Description:

The Transmode Service Extender (TSE) combines the capacity, transparency and scalability of WDM solutions with the ubiquity, manageability and interoperability of SDH/SONET, whilst retaining the design principle that has driven Transmode’s success to date: a product architecture that is inherently low cost, highly flexible and simple to operate.

TRANSMODE

Available

Available

Description:

Common Equipment - The core of the System 1100 is the compact subrack, which houses the plug-in modules and supplies power and data communications to these units. The subrack has 15 slot positions. 2 of these positions house the dual redundant power supplies (available in both 48V DC and 100-240V AC versions) and 1 position is reserved for the Network Management Board. The remaining 12 positions are used for traffic cards or for the optional 4-port Ethernet switch, which can be used to create a Data Communications Network for management information via the System 1100's Optical Supervisory Channel.

TRANSMODE

Available

Available

Description:

Single-Channel Transponders - The primary function of the single-channel transponder units is to convert the client signal to the appropriate CWDM wavelength. Thanks to Transmode's patented iWDM function with automatic protocol and bit-rate detection, one transponder type can be used to deliver a broad range of services, such as SDH/SONET, Ethernet, Fibre Channel, ESCON and Video. For additional cost-effectiveness, we have made 2 versions of the transponder available with 2.5Gbps and 1.25Gbps line rates. System capacity can be easily increased by adding transponder units, one at a time, without impacting existing traffic.

TRANSMODE

Available

Available

Description:

Optical Multiplexers - Our optical multiplexers are available in 2, 4 or 8-channel versions and are used to combine signals from the traffic cards (single channel transponders or Universal Aggregators) on to a single fibre pair. An Optical Add/Drop Multiplexer (OADM) is also available allowing a single wavelength to be dropped or added at specific sites in ring or linear add/drop topologies.

TRANSMODE

Available

Available

Description:

CWDM Amplifiers - Transmode is the first vendor to introduce amplified CWDM systems, allowing our customers to further increase their addressable market. Transmode's CWDM transmission system is available with PIN-based transponders for short reach applications, APD-based transponders for medium reach and CWDM amplifiers for long reach appli-cations. The current version of the CWDM Amplifier increases link span to 120 km for 4 CWDM channels simultaneously and offers monitoring of all relevant parameters.

TRANSMODE

Available

Available

Description:

Optical Protection - Transmode offers optical protection units that enable fibre path redundancy on a channel-by-channel basis. These units are particularly well suited for protection in ring applications. The solution includes monitoring capabilities for both the working and protection paths. The monitoring is available through the Network Management System. In case of a fibre cut in the protecting path, traffic will be switched over to the protecting path in less than 50 ms.

TRANSMODE

Available

Available

Description:

Pluggable Transponder - The Pluggable Transponder is a totally new concept in Metro Networking. It collapses the functionality of Transmode's existing standalone transponder into a device no larger than today's GBIC or SFP components. Being standards-based, the Pluggable Transponder can be plugged directly into the client port of customer equipment such as L2 Switches, providing a managed optical solution all the way to the customer premises.

TRANSMODE

Available

Available

« first previous Page 1 of 1. next last »

Disclaimer

Industrial Partner is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.